Toshiba Satellite 110CS Specifications

Download the Satellite 110CS Operator's Manual

If you find this useful please consider donating to Ham-Shack.com.

● Microprocessor
A Pentium processor with Voltage Reduction Technology (VRT) that operates at 100
MHz and 3.3/2.9 volts.

● Memory
Standard with 8 MB of CMOS RAM. This includes 640 KB of conventional memory
and 7360 KB of extended memory

● Hard Disk Drive (HDD)
An internal 810 million byte (772 MB) HDD.

● Floppy Disk Drive (FDD)
A 3.5-inch FDD supports 2HD (1.44 MB) floppy disks and 2DD (720 KB) floppy
disks.

● Display
The 110CS has an 11.3-inch Dual-scan Supertwist Nematic (DSTN) color LCD with
800 x 600 pixels. The 110CT has an 11.3-inch Thin-Film Transistor (TFT) color
LCD with 800 x 600 pixels. The built-in display controller supports 640 x 480
resolution with 16M colors capability and up to 1024 x 768 resolution with 256
colors on an external CRT.

● Keyboard
An easy-to-use 82/84-key keyboard provides a numeric keypad overlay for fast
numeric data entry or for cursor and page control. The keyboard supports software
that uses a 101- or 102-key enhanced keyboard.

● Batteries
Three different batteries: main battery, backup battery (for memory backup), and Real
Time Clock (RTC) battery.

● Expansion Memory Slot
An optional 8, 16, or 32 MB memory module can be installed in the memory slot.

● Parallel Port
This port can be used to connect a Centronics compatible printer or other parallel
device. The port supports ECP (Extended Capabilities Port) conforming to
IEEE·1284.

● Serial Port (9-Pin)
The serial controller is 16550UART compatible. This port can be used to connect
serial devices such as a serial printer, serial mouse, or external modem.

● External Monitor Port
The female, 15-pin, D-shell connector can be connected to an external SVGA monitor.

● External Keyboard/Mouse Port
Either a PS/2-compatible keyboard or mouse can be connected to this port. The
computer automatically recognizes which device is connected.

● PC Card Slot
A PC card slot supports up to two Personal Computer Memory Card International
Association (PCMCIA) standard version release 2.0 cards. The upper and lower slots
can each accommodate one Type II (5.0 mm) card, or the lower slot can accommodate
one Type III (10.5 mm) card when the upper slot is empty.

● Enhanced Port Replicator Port
This port enables connection of an enhanced port replicator. The enhanced port
replicator has two PC card slots (Type III), and expands connections to the following
devices: PS/2 keyboard, PS/2 mouse, serial port, parallel port, external CRT, AC-in,
and AC-out.

● AccuPoint
A pointer control stick, located in the center of the keyboard, provides convenient
control of the cursor without requiring desk space for a mouse.

 

Previous Page